Conceptual design to developed chassis- steering system

The assignment focuses on Conceptual design to developed chassis- steering system.So,Writer need to go through the chapter 4 file and understand whats in it completely and then writer need to develop the final design for chassis and steering.

Conceptual design to developed chassis- steering system

Description Attached file: Chapter 4 is a conceptual design to developed chassis and steering system of narrow track rapid response vehicle under traffic congestion condition. *** Writer’s file: Writer need to go through the chapter 4 file and understand whats in it completely and then writer need to develop the final design for chassis and steering by following any of those mentioned methods from the file which is chapter.

Conceptual design to developed chassis- steering system

4. *** Spec’s for developing design: width is 1.5 m and seating capacity of 2. Also, the rest specs are in excel sheet which is named as finalised vehicle specs. Design developed by the writer should be almost similar to specs in the excel sheet. *** Devloping design: Therefore,Writer should be well aware of catia or solid works to develop design for my model. Also, using any of those software design should be developed. *** After developing design: Besides, seperate paragraph justifying why we followed certain design procedure. *** Analysis of design: Writer can use Ansys or FEM to analyse the design. *** Finally,  seperate file from writer for steps followed to developed the design using any of those softwares. Same with analysing thing. Seperate file for analysis. 

Conceptual design to developed chassis- steering system

So,the references include the following,

Firstly,Abdullah, M., Najmi, M., and Harun, M., 2017. Chassis design and analysis of narrow track vehicle. Proceedings of Innovative Research and Industrial Dialogue, 177-178.

Secondly, Dutta, P., 2017. Design and Analysis of three wheeled vehicle chassis (Unpublished doctoral dissertation).

North Eastern Regional Institute of Science and Technology,

Finally,Huh, H., 2009. Engineering Plasticity and Its Applications from Nanoscale to Macroscale: Proceedings of the 9th AEPA 2008, Daejeon, Korea, 20-24 October 2008. Toh Tuck Link, Singapore: World Scientific. 

Detailed Instructions

 |

Click here to request for this assignment help

Powered by WordPress | Designed by: photography charlottesville va | Thanks to ppc software, penny auction and larry goins